Furniture Polish
Everything You Need to Know About Selecting the Right
Furniture Polish
With so many choices of furniture polish available on the
market today how do you know which one is right for you?
There are several factors to weigh up when you’re deciding
which furniture polish or beeswax to use on your furniture
and other wooden objects.
One critical factor is that the ingredients in commercial
polishes and cleaning products are rarely disclosed.
Moreover, these ingredients can be, and frequently are,
changed without warning or notification.
These ingredients may be harmless or harmful to the
furniture (and to you) and you have no way of knowing in
advance.
The first thing to look for is a furniture polish that only
contains natural ingredients, always steer clear of anything
that
contains silicon, gum turps or petro-chemical by-products,
these
types of furniture polishes are most commonly found in
supermarkets and
hardware stores and should be avoided at all costs.
What are the problems with these ingredients?
Let me go through them one by one and you'll see why it's
best to avoid them.
Silicone Silicone is put in furniture polish to make application easy
and buffing
off easy but if you ever need to have the piece of furniture
you are
polishing repaired or refinished it creates all sorts of
problems for the
repairer.
The repairer is unable to remove the silicone residue or
film that's left
on the surface which then causes the new lacquer being
applied to
bubble and not adhere to the surface as it is supposed to.
Long term use of silicone polishes on furniture can cause
the lacquer
on the surface to crack, split and break down.
Gum Turps
Gum turps is a common ingredient found in many beeswax
polishes
especially companies who produce old style traditional
waxes.
This is an ingredient that is commonly used to keep the
beeswax
polish soft while still in the can and to make the wax dry
when it's
applied to the furniture's surface.
The main problems associated with gum turps are: Toxicity,
skin irritations and generally poor results.
Gum turps in wax makes it hard to apply and hard to remove
and will
always leave an oily, smeary finish.
Petro-Chemicals and Tolulene
These ingredients are most commonly found in aerosol
furniture
polishes and oils, and as with gum turps they can create
toxic fumes, skin
irritations and give poor results.
Important Note:
Oil Based Furniture Polishes tend to attract dust rather
than repel it. If
you've ever used these types of furniture polish you might
of noticed that a couple of days after you’ve polished your
furniture it looks like you hadn't even done it.
The reason that happens is when the dust settles on the
surface
again it impregnates itself into the oily residue that's
left behind after polishing.
Always look for a Furniture Polish or Beeswax Polish that
leaves a fresh, smooth,
smear free finish.
Carnauba Wax
Carnauba wax is sometimes found in beeswax polishes but only
use
a polish that contains this ingredient if you are trying to
get a high
gloss finish on raw wood and is not overly useful on
lacquered finishes
as it can make a satin finish very patchy with shiny spots
all over it.
Most furniture restorers and repairers recommend using a
good quality beeswax furniture polish for the proper care of
wood furniture.
Inca™ TimberWax is a premium quality, high performance, easy
to
use beeswax furniture polish that leaves no streaks, smears
or
fingermarks and contains no petro-chemicals, gum turps,
silicone or
carnauba.
Click here for Inca™ Timberwax to polish furniture
Furniture Polish
Handy Tip:
Before starting any job test all products and procedures if possible
in an inconspicuous area first, to make sure there are no adverse
reactions then proceed with caution. Never leave cloths or steel
wool that have been in contact with revivers on the surface of your
furniture after you've finished, as reactions and damage can occur
in a very short space of time.